End Of Support For IBM InfoSphere 9.1.0

IBM Information Server (IIS)

IBM Information Server (IIS)

End of Support for IBM InfoSphere Information Server 9.1.0

IBM InfoSphere Information Server 9.1.0 will reach End of Support on 2018-09-30.  If you are still on the InfoSphere Information Server (IIS) 9.1.0, I hope you have a plan to migrate to an 11-series version soon.  InfoSphere Information Server (IIS) 11.7 would be worth considering if you don’t already own an 11-series license. InfoSphere Information Server (IIS) 11.7 will allow you to take advantage of the evolving thin client tools and other capabilities in the 2018 release pipeline without needing to perform another upgrade.

Related References

IBM Support, End of support notification: InfoSphere Information Server 9.1.0

IBM Support, Software lifecycle, InfoSphere Information Server 9.1.0

IBM Knowledge Center, Home, InfoSphere Information Server 11.7.0, IBM InfoSphere Information Server Version 11.7.0 documentation

Essbase Connector Error – Client Commands are Currently Not Being Accepted

DataStage Essbase Connector, Essbase Connector Error, Client Commands are Currently Not Being Accepted

DataStage Essbase Connector

While investigating a recent Infosphere Information Server (IIS), Datastage, Essbase Connect error I found the explanations of the probable causes of the error not to be terribly meaningful.  So, now that I have run our error to ground, I thought it might be nice to jot down a quick note of the potential cause of the ‘Client Commands are Currently Not Being Accepted’ error, which I gleaned from the process.

Error Message Id

  • IIS-CONN-ESSBASE-01010

Error Message

An error occurred while processing the request on the server. The error information is 1051544 (message on contacting or from application:[<<DateTimeStamp>>]Local////3544/Error(1013204) Client Commands are Currently Not Being Accepted.

Possible Causes of The Error

This Error is a problem with access to the Essbase object or accessing the security within the Essbase Object.  This can be a result of multiple issues, such as:

  • Object doesn’t exist – The Essbase object didn’t exist in the location specified,
  • Communications – the location is unavailable or cannot be reached,
  • Path Security – Security gets in the way to access the Essbase object location
  • Essbase Security – Security within the Essbase object does not support the user or filter being submitted. Also, the Essbase object security may be corrupted or incomplete.
  • Essbase Object Structure –  the Essbase object was not properly structured to support the filter or the Essbase filter is malformed for the current structure.

Related References

IBM Knowledge Center, InfoSphere Information Server 11.7.0, Connecting to data sources, Enterprise applications, IBM InfoSphere Information Server Pack for Hyperion Essbase

Printable PDF Version of This Article

 

What Are The DataStage / QualityStage Join Stages?

Three Stages Which Join Records

Three Stages Which Join Records

While chasing an error to which only applied to join type stages, I thought it might be nice to identify what the InfoSphere Information Server DataStage / QualityStage are.  There are three of them, as you can see from the picture above, which are the:

  • Join Stage,
  • Lookup Stage,
  • And, Merge Stage.

All three stages that join data based on the values of identified key columns.

Related References

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Lookup Stage

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Join Stage

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Merge Stage

https://www.ibm.com/support/knowledgecenter/SSZJPZ_11.7.0/com.ibm.swg.im.iis.ds.parjob.dev.doc/topics/c_deeref_Merge_Stage.html

Parallel jobs on Windows fail with APT_IOPort::readBlkVirt;error

APT_IOPort::readBlkVirt Error Screenshot

APT_IOPort::readBlkVirt Error Screenshot

This a known error for windows systems and applies to DataStage and DataQuality jobs using the any or all the three join type stages (Join, Merge, and Lookup).

Error Message

  • <<Link name>>,0: APT_IOPort::readBlkVirt: read for block header, partition 0, [fd 4], returned -1 with errno 10,054 (Unknown error)

Message ID

  • IIS-DSEE-TFIO-00223

Applies To

  • Windows systems only
  • Parallel Engine Jobs the three join type stages (Join, Merge, and Lookup). It does not apply to Server Engine jobs.
  • Infosphere Information Server (IIS), Datastage and DataQuality 9.1 and higher

The Fix

  • Add the APT_NO_IOCOMM_OPTIMIZATION in project administrator and set to blank or 0. I left it blank so it would not impact other jobs
  • Add the environment variable to the job producing the error and set to 1

What it APT_NO_IOCOMM_OPTIMIZATION Does

  • Sets the use of shared memory as the transport type, rather than using the default sockets transport type.
  • Note that in most cases sockets transport type is faster, so, you likely will not to set this across the project as the default for all job. It is best to apply it as necessary for problematic jobs.

Related References

InfoSphere DataStage and QualityStage, Version 9.1 Job Compatibility

IBM Support, JR54078: PARALLEL JOBS ON WINDOWS FAIL WITH APT_IOPORT::READBLKVIRT; ERROR

IBM Support, Information Server DataStage job fails with unknown error 10,054.

 

DataStage – How to Pass the Invocation ID from one Sequence to another

DataStage Invocation ID Passing Pattern Overview

DataStage Invocation ID Passing Pattern Overview

When you are controlling a chain of sequences in the job stream and taking advantage of reusable (multiple instances) jobs it is useful to be able to pass the Invocation ID from the master controlling sequence and have it passed down and assigned to the job run.  This can easily be done with needing to manual enter the values in each of the sequences, by leveraging the DSJobInvocationId variable.  For this to work:

  • The job must have ‘Allow Multiple Instance’ enabled
  • The Invocation Id must be provided in the Parent sequence must have the Invocation Name entered
  • The receiving child sequence will have the invocation variable entered
  • At runtime, a DataStage invocation id instance of the multi-instance job will generate with its own logs.

Variable Name

  • DSJobInvocationId

Note

This approach allows for the reuse of job and the assignment of meaningful instance extension names, which are managed for a single point of entry in the object tree.

Related References: 

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and QualityStage > Designing DataStage and QualityStage jobs > Building sequence jobs > Sequence job activities > Job Activity properties

DataStage – How to use single quoted parameter list in an Oracle Connector

Data Integration

Data Integration

While working with a client’s 9.1 DataStage version, I ran into a situation where they wanted to parameterize SQL where clause lists in an Oracle Connector stage, which honestly was not very straight forward to figure out.  First, if the APT_OSL_PARAM_ESC_SQUOTE is not set and single quotes are used in the parameter, the job creates unquoted invalid SQL when the parameter is populated.  Second, I found much of the information confusing and/or incomplete in its explanation.   After some research and some trial and error, here is how I resolved the issue.  I’ll endeavor to be concise, but holistic in my explanation.

When this Variable applies

This where I know this process applies, there may be other circumstances to which is this applicable, but I’m listing the ones here with which I have recent experience.

Infosphere Information Server Datastage

  • Versions 91, 11.3, and 11.5

Oracle RDBMS

  • Versions 11g and 12c

Configurations process

Here is a brief explanation of the steps I used to implement the where clause as a parameter.  Please note that in this example, I am using a job parameter to populate on a portion of the where clause, you can certainly pass the entire where clause as a parameter, if it is not too long.

Configure Project Variable in Administrator

  • Add APT_OSL_PARAM_ESC_SQUOTE to project in Administrator
  • Populate the APT_OSL_PARAM_ESC_SQUOTE Variable \
APT_OSL_PARAM_ESC_SQUOTE Project Variable

APT_OSL_PARAM_ESC_SQUOTE Project Variable

Create job parameter

Following your project name convention or standard practice, if you customer and/or project do not have established naming conventions, create the job parameter in the job. See jp_ItemSource parameter in the image below.

Job Parameter In Oracle Connector

Job Parameter In Oracle Connector

Add job parameter to Custom SQL in Select Oracle Connector Stage

On the Job parameter has been created, add the job parameter to the SQL statement of the job.

Job Parameter In SQL

Job Parameter In SQL

Related References

IBM Knowledge Center > InfoSphere Information Server 11.5.0

Connecting to data sources > Databases > Oracle databases > Oracle connector

IBM Support > Limitation of the Parameter APT_OSL_PARAM_ESC_SQUOTE on Plugins on Parallel Canvas

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and Quality > Stage > Reference > Parallel Job Reference > Environment Variables > Miscellaneous > APT_OSL_PARAM_ESC_SQUOTE

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database, How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Sometimes you just need to know if your Oracle Client install is 32 bit or 64 bit. But how do you figure that out? Here are two methods you can try.

The first method

Go to the %ORACLE_HOME%\inventory\ContentsXML folder and open the comps.xml file.
Look for <DEP_LIST> on the ~second screen.

If you see this: PLAT=”NT_AMD64” then your Oracle Home is 64 bit
If you see this: PLAT=”NT_X86” then your Oracle Home is 32 bit.

It is possible to have both the 32-bit and the 64-bit Oracle Homes installed.

The second method

This method is a bit faster. Windows has a different lib directory for 32-bit and 64-bit software. If you look under the ORACLE_HOME folder if you see a “lib” AND a “lib32” folder you have a 64 bit Oracle Client. If you see just the “lib” folder you’ve got a 32 bit Oracle Client.

Related References

 

Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS), Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS)

Since the Infosphere, information server, repository, has to be installed manually with the scripts provided in the IBM software, sometimes you run into difficulties. So, here’s a quick script, which I have found useful in the past to identify user permissions for the IAUSER on Oracle database’s to help rundown discrepancies in user permissions.

 

SELECT *

FROM ALL_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

If we cannot run against the ALL_TAB_PRIVS view, then we can try the ALL_TAB_PRIVS view:

 

SELECT *

FROM USER_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

Related References

oracle help Center > Database Reference > ALL_TAB_PRIVS view

What are the Core Capability of Infosphere Information Server?

Information Server Core (IIS) Capabilities

Information Server Core (IIS) Capabilities

 

Three Core Capabilities of Information Server

InfoSphere Information Server (IIS) has three core capabilities:

  • Information Governance
  • Data Integration
  • Data Quality

What the Core Capabilities Provide

The three-core capability translate in to the high-level business processes:

Information Governance – Understand and collaborate

Provides a centrally managed repository and approach, which provides:

  • Information blueprints
  • Relationship discovery across data sources
  • Information technology (IT)-to-business mapping

Data Integration – Transform and deliver

A data integration capability, which provides:

  • Transformation
    • Massive scalability
    • Power for any complexity
    • Total traceability
  • Delivery
    • Data capture at any time
    • Delivery anywhere
    • Big data readiness

Data Quality – Cleanse and monitor

To turn data assets into trusted information:

  • Analysis & validation
  • Data cleansing
  • Data quality rules & management

Related References

IBM Knowledge Center, InfoSphere Information Server Version 11.5.0

Overview of IBM InfoSphere Information Server, Introduction to InfoSphere Information Server

 

 

 

SFDC – Using a timestamp literal in a where clause

Salesforce Connector

Salesforce Connector

Working with timestamp literals in the Infosphere SFDC Connector soql is much like working date literals.  So, here a quick example which may save you some time.

SOQL Timestamp String Literals Where Clause Rules

Basically, the timestamp pattern is straight forward and like the process for dates, but there are some differences. The basic rules are for a soql where clause:

  • No quotes
  • No functions
  • No Casting function, or casting for the where soql where clause to read it
  • It only applies to datetime fields
  • A Timestamp identifier ‘T’
  • And the ISO 1806 time notations

Example SOQL Timestamp String Literals

So, here are a couple of timestamp string literal examples in SQL:

  • 1901-01-01T00:00:00-00:00
  • 2016-01-31T00:00:00-00:00
  • 9999-10-31T00:00:00-00:00

Example SQL with Timestamp String Literal Where Clause

 

Select e.Id,

e.AccountId,

e.StartDateTime

From Event e

WHERE e.StartDateTime > 2014-10-31T00:00:00-00:00

 

Related References

Salesforce Developer Documentation

Home, Developer Documentation, Force.com SOQL and SOSL Reference

https://developer.salesforce.com/docs/atlas.en-us.soql_sosl.meta/soql_sosl/sforce_api_calls_soql_select_dateformats.htm

Salesforce Workbench

Home, Technical Library, Workbench

W3C

Date Time Formats

 

SFDC Salesforce Connector – Column Returns Null values, when SOQL Returns Data in Workbench

Salesforce Connector

Salesforce Connector

Recently, encountered a scenario, which is a little out of the norm while using the SFDC Connector.  Once the issue is understood, it is easily remedied.

The problem / Error

  • SOQL run in Salesforce workbench and column returns data
  • The DataStage job/ETL runs without errors or warnings
  • The target column output only returns null values

The Cause

In short the cause is a misalignment between the SOQL field name and the column name in the columns tab of the connector.

The Solution

The fix is simply to convert the dots in the field name to underscores.   Basically, a field name on SOQL of Account.RecordType.Name becomes Account_RecordType_Name.

Example Field / Column Name  Fix

Example SQL

Select c.Id,

c.AccountId,

c.CV_Account_Number__c,

c.Name,

c.Role__c,

c.Status__c,

c.Account.RecordType.Name

From Contact c

Columns Tab With Correct Naming Alignment

Please note that the qualifying dots have been converted to underscores.

infosphere datastage SFDC Connector Columns Tab

SFDC Connector Columns Tab

Related References