End Of Support For IBM InfoSphere 9.1.0

IBM Information Server (IIS)

IBM Information Server (IIS)

End of Support for IBM InfoSphere Information Server 9.1.0

IBM InfoSphere Information Server 9.1.0 will reach End of Support on 2018-09-30.  If you are still on the InfoSphere Information Server (IIS) 9.1.0, I hope you have a plan to migrate to an 11-series version soon.  InfoSphere Information Server (IIS) 11.7 would be worth considering if you don’t already own an 11-series license. InfoSphere Information Server (IIS) 11.7 will allow you to take advantage of the evolving thin client tools and other capabilities in the 2018 release pipeline without needing to perform another upgrade.

Related References

IBM Support, End of support notification: InfoSphere Information Server 9.1.0

IBM Support, Software lifecycle, InfoSphere Information Server 9.1.0

IBM Knowledge Center, Home, InfoSphere Information Server 11.7.0, IBM InfoSphere Information Server Version 11.7.0 documentation

Essbase Connector Error – Client Commands are Currently Not Being Accepted

DataStage Essbase Connector, Essbase Connector Error, Client Commands are Currently Not Being Accepted

DataStage Essbase Connector

While investigating a recent Infosphere Information Server (IIS), Datastage, Essbase Connect error I found the explanations of the probable causes of the error not to be terribly meaningful.  So, now that I have run our error to ground, I thought it might be nice to jot down a quick note of the potential cause of the ‘Client Commands are Currently Not Being Accepted’ error, which I gleaned from the process.

Error Message Id

  • IIS-CONN-ESSBASE-01010

Error Message

An error occurred while processing the request on the server. The error information is 1051544 (message on contacting or from application:[<<DateTimeStamp>>]Local////3544/Error(1013204) Client Commands are Currently Not Being Accepted.

Possible Causes of The Error

This Error is a problem with access to the Essbase object or accessing the security within the Essbase Object.  This can be a result of multiple issues, such as:

  • Object doesn’t exist – The Essbase object didn’t exist in the location specified,
  • Communications – the location is unavailable or cannot be reached,
  • Path Security – Security gets in the way to access the Essbase object location
  • Essbase Security – Security within the Essbase object does not support the user or filter being submitted. Also, the Essbase object security may be corrupted or incomplete.
  • Essbase Object Structure –  the Essbase object was not properly structured to support the filter or the Essbase filter is malformed for the current structure.

Related References

IBM Knowledge Center, InfoSphere Information Server 11.7.0, Connecting to data sources, Enterprise applications, IBM InfoSphere Information Server Pack for Hyperion Essbase

Printable PDF Version of This Article

 

DataStage – How to Pass the Invocation ID from one Sequence to another

DataStage Invocation ID Passing Pattern Overview

DataStage Invocation ID Passing Pattern Overview

When you are controlling a chain of sequences in the job stream and taking advantage of reusable (multiple instances) jobs it is useful to be able to pass the Invocation ID from the master controlling sequence and have it passed down and assigned to the job run.  This can easily be done with needing to manual enter the values in each of the sequences, by leveraging the DSJobInvocationId variable.  For this to work:

  • The job must have ‘Allow Multiple Instance’ enabled
  • The Invocation Id must be provided in the Parent sequence must have the Invocation Name entered
  • The receiving child sequence will have the invocation variable entered
  • At runtime, a DataStage invocation id instance of the multi-instance job will generate with its own logs.

Variable Name

  • DSJobInvocationId

Note

This approach allows for the reuse of job and the assignment of meaningful instance extension names, which are managed for a single point of entry in the object tree.

Related References: 

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and QualityStage > Designing DataStage and QualityStage jobs > Building sequence jobs > Sequence job activities > Job Activity properties

DataStage – How to use single quoted parameter list in an Oracle Connector

Data Integration

Data Integration

While working with a client’s 9.1 DataStage version, I ran into a situation where they wanted to parameterize SQL where clause lists in an Oracle Connector stage, which honestly was not very straight forward to figure out.  First, if the APT_OSL_PARAM_ESC_SQUOTE is not set and single quotes are used in the parameter, the job creates unquoted invalid SQL when the parameter is populated.  Second, I found much of the information confusing and/or incomplete in its explanation.   After some research and some trial and error, here is how I resolved the issue.  I’ll endeavor to be concise, but holistic in my explanation.

When this Variable applies

This where I know this process applies, there may be other circumstances to which is this applicable, but I’m listing the ones here with which I have recent experience.

Infosphere Information Server Datastage

  • Versions 91, 11.3, and 11.5

Oracle RDBMS

  • Versions 11g and 12c

Configurations process

Here is a brief explanation of the steps I used to implement the where clause as a parameter.  Please note that in this example, I am using a job parameter to populate on a portion of the where clause, you can certainly pass the entire where clause as a parameter, if it is not too long.

Configure Project Variable in Administrator

  • Add APT_OSL_PARAM_ESC_SQUOTE to project in Administrator
  • Populate the APT_OSL_PARAM_ESC_SQUOTE Variable \
APT_OSL_PARAM_ESC_SQUOTE Project Variable

APT_OSL_PARAM_ESC_SQUOTE Project Variable

Create job parameter

Following your project name convention or standard practice, if you customer and/or project do not have established naming conventions, create the job parameter in the job. See jp_ItemSource parameter in the image below.

Job Parameter In Oracle Connector

Job Parameter In Oracle Connector

Add job parameter to Custom SQL in Select Oracle Connector Stage

On the Job parameter has been created, add the job parameter to the SQL statement of the job.

Job Parameter In SQL

Job Parameter In SQL

Related References

IBM Knowledge Center > InfoSphere Information Server 11.5.0

Connecting to data sources > Databases > Oracle databases > Oracle connector

IBM Support > Limitation of the Parameter APT_OSL_PARAM_ESC_SQUOTE on Plugins on Parallel Canvas

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and Quality > Stage > Reference > Parallel Job Reference > Environment Variables > Miscellaneous > APT_OSL_PARAM_ESC_SQUOTE

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database, How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Sometimes you just need to know if your Oracle Client install is 32 bit or 64 bit. But how do you figure that out? Here are two methods you can try.

The first method

Go to the %ORACLE_HOME%\inventory\ContentsXML folder and open the comps.xml file.
Look for <DEP_LIST> on the ~second screen.

If you see this: PLAT=”NT_AMD64” then your Oracle Home is 64 bit
If you see this: PLAT=”NT_X86” then your Oracle Home is 32 bit.

It is possible to have both the 32-bit and the 64-bit Oracle Homes installed.

The second method

This method is a bit faster. Windows has a different lib directory for 32-bit and 64-bit software. If you look under the ORACLE_HOME folder if you see a “lib” AND a “lib32” folder you have a 64 bit Oracle Client. If you see just the “lib” folder you’ve got a 32 bit Oracle Client.

Related References

 

Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS), Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS)

Since the Infosphere, information server, repository, has to be installed manually with the scripts provided in the IBM software, sometimes you run into difficulties. So, here’s a quick script, which I have found useful in the past to identify user permissions for the IAUSER on Oracle database’s to help rundown discrepancies in user permissions.

 

SELECT *

FROM ALL_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

If we cannot run against the ALL_TAB_PRIVS view, then we can try the ALL_TAB_PRIVS view:

 

SELECT *

FROM USER_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

Related References

oracle help Center > Database Reference > ALL_TAB_PRIVS view

What are the Core Capability of Infosphere Information Server?

Information Server Core (IIS) Capabilities

Information Server Core (IIS) Capabilities

 

Three Core Capabilities of Information Server

InfoSphere Information Server (IIS) has three core capabilities:

  • Information Governance
  • Data Integration
  • Data Quality

What the Core Capabilities Provide

The three-core capability translate in to the high-level business processes:

Information Governance – Understand and collaborate

Provides a centrally managed repository and approach, which provides:

  • Information blueprints
  • Relationship discovery across data sources
  • Information technology (IT)-to-business mapping

Data Integration – Transform and deliver

A data integration capability, which provides:

  • Transformation
    • Massive scalability
    • Power for any complexity
    • Total traceability
  • Delivery
    • Data capture at any time
    • Delivery anywhere
    • Big data readiness

Data Quality – Cleanse and monitor

To turn data assets into trusted information:

  • Analysis & validation
  • Data cleansing
  • Data quality rules & management

Related References

IBM Knowledge Center, InfoSphere Information Server Version 11.5.0

Overview of IBM InfoSphere Information Server, Introduction to InfoSphere Information Server