End Of Support For IBM InfoSphere 9.1.0

IBM Information Server (IIS)

IBM Information Server (IIS)

End of Support for IBM InfoSphere Information Server 9.1.0

IBM InfoSphere Information Server 9.1.0 will reach End of Support on 2018-09-30.  If you are still on the InfoSphere Information Server (IIS) 9.1.0, I hope you have a plan to migrate to an 11-series version soon.  InfoSphere Information Server (IIS) 11.7 would be worth considering if you don’t already own an 11-series license. InfoSphere Information Server (IIS) 11.7 will allow you to take advantage of the evolving thin client tools and other capabilities in the 2018 release pipeline without needing to perform another upgrade.

Related References

IBM Support, End of support notification: InfoSphere Information Server 9.1.0

IBM Support, Software lifecycle, InfoSphere Information Server 9.1.0

IBM Knowledge Center, Home, InfoSphere Information Server 11.7.0, IBM InfoSphere Information Server Version 11.7.0 documentation

Essbase Connector Error – Client Commands are Currently Not Being Accepted

DataStage Essbase Connector, Essbase Connector Error, Client Commands are Currently Not Being Accepted

DataStage Essbase Connector

While investigating a recent Infosphere Information Server (IIS), Datastage, Essbase Connect error I found the explanations of the probable causes of the error not to be terribly meaningful.  So, now that I have run our error to ground, I thought it might be nice to jot down a quick note of the potential cause of the ‘Client Commands are Currently Not Being Accepted’ error, which I gleaned from the process.

Error Message Id

  • IIS-CONN-ESSBASE-01010

Error Message

An error occurred while processing the request on the server. The error information is 1051544 (message on contacting or from application:[<<DateTimeStamp>>]Local////3544/Error(1013204) Client Commands are Currently Not Being Accepted.

Possible Causes of The Error

This Error is a problem with access to the Essbase object or accessing the security within the Essbase Object.  This can be a result of multiple issues, such as:

  • Object doesn’t exist – The Essbase object didn’t exist in the location specified,
  • Communications – the location is unavailable or cannot be reached,
  • Path Security – Security gets in the way to access the Essbase object location
  • Essbase Security – Security within the Essbase object does not support the user or filter being submitted. Also, the Essbase object security may be corrupted or incomplete.
  • Essbase Object Structure –  the Essbase object was not properly structured to support the filter or the Essbase filter is malformed for the current structure.

Related References

IBM Knowledge Center, InfoSphere Information Server 11.7.0, Connecting to data sources, Enterprise applications, IBM InfoSphere Information Server Pack for Hyperion Essbase

Printable PDF Version of This Article

 

What Are The DataStage / QualityStage Join Stages?

Three Stages Which Join Records

Three Stages Which Join Records

While chasing an error to which only applied to join type stages, I thought it might be nice to identify what the InfoSphere Information Server DataStage / QualityStage are.  There are three of them, as you can see from the picture above, which are the:

  • Join Stage,
  • Lookup Stage,
  • And, Merge Stage.

All three stages that join data based on the values of identified key columns.

Related References

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Lookup Stage

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Join Stage

IBM Knowledge Center, InfoSphere Information Server 11.7.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Processing Data, Merge Stage

https://www.ibm.com/support/knowledgecenter/SSZJPZ_11.7.0/com.ibm.swg.im.iis.ds.parjob.dev.doc/topics/c_deeref_Merge_Stage.html

Parallel jobs on Windows fail with APT_IOPort::readBlkVirt;error

APT_IOPort::readBlkVirt Error Screenshot

APT_IOPort::readBlkVirt Error Screenshot

This a known error for windows systems and applies to DataStage and DataQuality jobs using the any or all the three join type stages (Join, Merge, and Lookup).

Error Message

  • <<Link name>>,0: APT_IOPort::readBlkVirt: read for block header, partition 0, [fd 4], returned -1 with errno 10,054 (Unknown error)

Message ID

  • IIS-DSEE-TFIO-00223

Applies To

  • Windows systems only
  • Parallel Engine Jobs the three join type stages (Join, Merge, and Lookup). It does not apply to Server Engine jobs.
  • Infosphere Information Server (IIS), Datastage and DataQuality 9.1 and higher

The Fix

  • Add the APT_NO_IOCOMM_OPTIMIZATION in project administrator and set to blank or 0. I left it blank so it would not impact other jobs
  • Add the environment variable to the job producing the error and set to 1

What it APT_NO_IOCOMM_OPTIMIZATION Does

  • Sets the use of shared memory as the transport type, rather than using the default sockets transport type.
  • Note that in most cases sockets transport type is faster, so, you likely will not to set this across the project as the default for all job. It is best to apply it as necessary for problematic jobs.

Related References

InfoSphere DataStage and QualityStage, Version 9.1 Job Compatibility

IBM Support, JR54078: PARALLEL JOBS ON WINDOWS FAIL WITH APT_IOPORT::READBLKVIRT; ERROR

IBM Support, Information Server DataStage job fails with unknown error 10,054.

 

DataStage – How to Pass the Invocation ID from one Sequence to another

DataStage Invocation ID Passing Pattern Overview

DataStage Invocation ID Passing Pattern Overview

When you are controlling a chain of sequences in the job stream and taking advantage of reusable (multiple instances) jobs it is useful to be able to pass the Invocation ID from the master controlling sequence and have it passed down and assigned to the job run.  This can easily be done with needing to manual enter the values in each of the sequences, by leveraging the DSJobInvocationId variable.  For this to work:

  • The job must have ‘Allow Multiple Instance’ enabled
  • The Invocation Id must be provided in the Parent sequence must have the Invocation Name entered
  • The receiving child sequence will have the invocation variable entered
  • At runtime, a DataStage invocation id instance of the multi-instance job will generate with its own logs.

Variable Name

  • DSJobInvocationId

Note

This approach allows for the reuse of job and the assignment of meaningful instance extension names, which are managed for a single point of entry in the object tree.

Related References: 

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and QualityStage > Designing DataStage and QualityStage jobs > Building sequence jobs > Sequence job activities > Job Activity properties

DataStage – How to use single quoted parameter list in an Oracle Connector

Data Integration

Data Integration

While working with a client’s 9.1 DataStage version, I ran into a situation where they wanted to parameterize SQL where clause lists in an Oracle Connector stage, which honestly was not very straight forward to figure out.  First, if the APT_OSL_PARAM_ESC_SQUOTE is not set and single quotes are used in the parameter, the job creates unquoted invalid SQL when the parameter is populated.  Second, I found much of the information confusing and/or incomplete in its explanation.   After some research and some trial and error, here is how I resolved the issue.  I’ll endeavor to be concise, but holistic in my explanation.

When this Variable applies

This where I know this process applies, there may be other circumstances to which is this applicable, but I’m listing the ones here with which I have recent experience.

Infosphere Information Server Datastage

  • Versions 91, 11.3, and 11.5

Oracle RDBMS

  • Versions 11g and 12c

Configurations process

Here is a brief explanation of the steps I used to implement the where clause as a parameter.  Please note that in this example, I am using a job parameter to populate on a portion of the where clause, you can certainly pass the entire where clause as a parameter, if it is not too long.

Configure Project Variable in Administrator

  • Add APT_OSL_PARAM_ESC_SQUOTE to project in Administrator
  • Populate the APT_OSL_PARAM_ESC_SQUOTE Variable \
APT_OSL_PARAM_ESC_SQUOTE Project Variable

APT_OSL_PARAM_ESC_SQUOTE Project Variable

Create job parameter

Following your project name convention or standard practice, if you customer and/or project do not have established naming conventions, create the job parameter in the job. See jp_ItemSource parameter in the image below.

Job Parameter In Oracle Connector

Job Parameter In Oracle Connector

Add job parameter to Custom SQL in Select Oracle Connector Stage

On the Job parameter has been created, add the job parameter to the SQL statement of the job.

Job Parameter In SQL

Job Parameter In SQL

Related References

IBM Knowledge Center > InfoSphere Information Server 11.5.0

Connecting to data sources > Databases > Oracle databases > Oracle connector

IBM Support > Limitation of the Parameter APT_OSL_PARAM_ESC_SQUOTE on Plugins on Parallel Canvas

IBM Knowledge Center > InfoSphere Information Server 11.5.0

InfoSphere DataStage and Quality > Stage > Reference > Parallel Job Reference > Environment Variables > Miscellaneous > APT_OSL_PARAM_ESC_SQUOTE

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database, How to know if your Oracle Client install is 32 Bit or 64 Bit

Oracle Database

 

How to know if your Oracle Client install is 32 Bit or 64 Bit

Sometimes you just need to know if your Oracle Client install is 32 bit or 64 bit. But how do you figure that out? Here are two methods you can try.

The first method

Go to the %ORACLE_HOME%\inventory\ContentsXML folder and open the comps.xml file.
Look for <DEP_LIST> on the ~second screen.

If you see this: PLAT=”NT_AMD64” then your Oracle Home is 64 bit
If you see this: PLAT=”NT_X86” then your Oracle Home is 32 bit.

It is possible to have both the 32-bit and the 64-bit Oracle Homes installed.

The second method

This method is a bit faster. Windows has a different lib directory for 32-bit and 64-bit software. If you look under the ORACLE_HOME folder if you see a “lib” AND a “lib32” folder you have a 64 bit Oracle Client. If you see just the “lib” folder you’ve got a 32 bit Oracle Client.

Related References

 

OLTP vs Data Warehousing

Database, OLTP vs Data Warehousing

Database

OLTP Versus Data Warehousing

I’ve tried to explain the difference between OLTP systems and a Data Warehouse to my managers many times, as I’ve worked at a hospital as a Data Warehouse Manager/data analyst for many years. Why was the list that came from the operational applications different than the one that came from the Data Warehouse? Why couldn’t I just get a list of patients that were laying in the hospital right now from the Data Warehouse? So I explained, and explained again, and explained to another manager, and another. You get the picture.
In this article I will explain this very same thing to you. So you know  how to explain this to your manager. Or, if you are a manager, you might understand what your data analyst can and cannot give you.

OLTP

OLTP stands for OLine Transactional Processing. With other words: getting your data directly from the operational systems to make reports. An operational system is a system that is used for the day to day processes.
For example: When a patient checks in, his or her information gets entered into a Patient Information System. The doctor put scheduled tests, a diagnoses and a treatment plan in there as well. Doctors, nurses and other people working with patients use this system on a daily basis to enter and get detailed information on their patients.
The way the data is stored within operational systems is so the data can be used efficiently by the people working directly on the product, or with the patient in this case.

Data Warehousing

A Data Warehouse is a big database that fills itself with data from operational systems. It is used solely for reporting and analytical purposes. No one uses this data for day to day operations. The beauty of a Data Warehouse is, among others, that you can combine the data from the different operational systems. You can actually combine the number of patients in a department with the number of nurses for example. You can see how far a doctor is behind schedule and find the cause of that by looking at the patients. Does he run late with elderly patients? Is there a particular diagnoses that takes more time? Or does he just oversleep a lot? You can use this information to look at the past, see trends, so you can plan for the future.

The difference between OLTP and Data Warehousing

This is how a Data Warehouse works:

How a Data Warehouse works

How a Data Warehouse works

The data gets entered into the operational systems. Then the ETL processes Extract this data from these systems, Transforms the data so it will fit neatly into the Data Warehouse, and then Loads it into the Data Warehouse. After that reports are formed with a reporting tool, from the data that lies in the Data Warehouse.

This is how OLTP works:

How OLTP works

How OLTP works

Reports are directly made from the data inside the database of the operational systems. Some operational systems come with their own reporting tool, but you can always use a standalone reporting tool to make reports form the operational databases.

Pro’s and Con’s

Data Warehousing

Pro’s:

  • There is no strain on the operational systems during business hours
    • As you can schedule the ETL processes to run during the hours the least amount of people are using the operational system, you won’t disturb the operational processes. And when you need to run a large query, the operational systems won’t be affected, as you are working directly on the Data Warehouse database.
  • Data from different systems can be combined
    • It is possible to combine finance and productivity data for example. As the ETL process transforms the data so it can be combined.
  • Data is optimized for making queries and reports
    • You use different data in reports than you use on a day to day base. A Data Warehouse is built for this. For instance: most Data Warehouses have a separate date table where the weekday, day, month and year is saved. You can make a query to derive the weekday from a date, but that takes processing time. By using a separate table like this you’ll save time and decrease the strain on the database.
  • Data is saved longer than in the source systems
    • The source systems need to have their old records deleted when they are no longer used in the day to day operations. So they get deleted to gain performance.

Con’s:

  • You always look at the past
    • A Data Warehouse is updated once a night, or even just once a week. That means that you never have the latest data. Staying with the hospital example: you never knew how many patients are in the hospital are right now. Or what surgeon didn’t show up on time this morning.
  • You don’t have all the data
    • A Data Warehouse is built for discovering trends, showing the big picture. The little details, the ones not used in trends, get discarded during the ETL process.
  • Data isn’t the same as the data in the source systems
    • Because the data is older than those of the source systems it will always be a little different. But also because of the Transformation step in the ETL process, data will be a little different. It doesn’t mean one or the other is wrong. It’s just a different way of looking at the data. For example: the Data Warehouse at the hospital excluded all transactions that were marked as cancelled. If you try to get the same reports from both systems, and don’t exclude the cancelled transactions in the source system, you’ll get different results.

online transactional processing (OLTP)

Pro’s

  • You get real time data
    • If someone is entering a new record now, you’ll see it right away in your report. No delays.
  • You’ve got all the details
    • You have access to all the details that the employees have entered into the system. No grouping, no skipping records, just all the raw data that’s available.

Con’s

  • You are putting strain on an application during business hours.
    • When you are making a large query, you can take processing space that would otherwise be available to the people that need to work with this system for their day to day operations. And if you make an error, by for instance forgetting to put a date filter on your query, you could even bring the system down so no one can use it anymore.
  • You can’t compare the data with data from other sources.
    • Even when the systems are similar. Like an HR system and a payroll system that use each other to work. Data is always going to be different because it is granulated on a different level, or not all data is relevant for both systems.
  • You don’t have access to old data
    • To keep the applications at peak performance, old data, that’s irrelevant to day to day operations is deleted.
  • Data is optimized to suit day to day operations
    • And not for report making. This means you’ll have to get creative with your queries to get the data you need.

So what method should you use?

That all depends on what you need at that moment. If you need detailed information about things that are happening now, you should use OLTP.
If you are looking for trends, or insights on a higher level, you should use a Data Warehouse.

 Related References

 

 

Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS), Oracle – How to get a list of user permission grants

IBM Infosphere Information Server (IIS)

Since the Infosphere, information server, repository, has to be installed manually with the scripts provided in the IBM software, sometimes you run into difficulties. So, here’s a quick script, which I have found useful in the past to identify user permissions for the IAUSER on Oracle database’s to help rundown discrepancies in user permissions.

 

SELECT *

FROM ALL_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

If we cannot run against the ALL_TAB_PRIVS view, then we can try the ALL_TAB_PRIVS view:

 

SELECT *

FROM USER_TAB_PRIVS

WHERE  GRANTEE = ‘iauser’

 

Related References

oracle help Center > Database Reference > ALL_TAB_PRIVS view

What are the Core Capability of Infosphere Information Server?

Information Server Core (IIS) Capabilities

Information Server Core (IIS) Capabilities

 

Three Core Capabilities of Information Server

InfoSphere Information Server (IIS) has three core capabilities:

  • Information Governance
  • Data Integration
  • Data Quality

What the Core Capabilities Provide

The three-core capability translate in to the high-level business processes:

Information Governance – Understand and collaborate

Provides a centrally managed repository and approach, which provides:

  • Information blueprints
  • Relationship discovery across data sources
  • Information technology (IT)-to-business mapping

Data Integration – Transform and deliver

A data integration capability, which provides:

  • Transformation
    • Massive scalability
    • Power for any complexity
    • Total traceability
  • Delivery
    • Data capture at any time
    • Delivery anywhere
    • Big data readiness

Data Quality – Cleanse and monitor

To turn data assets into trusted information:

  • Analysis & validation
  • Data cleansing
  • Data quality rules & management

Related References

IBM Knowledge Center, InfoSphere Information Server Version 11.5.0

Overview of IBM InfoSphere Information Server, Introduction to InfoSphere Information Server

 

 

 

SFDC – Using a timestamp literal in a where clause

Salesforce Connector

Salesforce Connector

Working with timestamp literals in the Infosphere SFDC Connector soql is much like working date literals.  So, here a quick example which may save you some time.

SOQL Timestamp String Literals Where Clause Rules

Basically, the timestamp pattern is straight forward and like the process for dates, but there are some differences. The basic rules are for a soql where clause:

  • No quotes
  • No functions
  • No Casting function, or casting for the where soql where clause to read it
  • It only applies to datetime fields
  • A Timestamp identifier ‘T’
  • And the ISO 1806 time notations

Example SOQL Timestamp String Literals

So, here are a couple of timestamp string literal examples in SQL:

  • 1901-01-01T00:00:00-00:00
  • 2016-01-31T00:00:00-00:00
  • 9999-10-31T00:00:00-00:00

Example SQL with Timestamp String Literal Where Clause

 

Select e.Id,

e.AccountId,

e.StartDateTime

From Event e

WHERE e.StartDateTime > 2014-10-31T00:00:00-00:00

 

Related References

Salesforce Developer Documentation

Home, Developer Documentation, Force.com SOQL and SOSL Reference

https://developer.salesforce.com/docs/atlas.en-us.soql_sosl.meta/soql_sosl/sforce_api_calls_soql_select_dateformats.htm

Salesforce Workbench

Home, Technical Library, Workbench

W3C

Date Time Formats

 

SFDC Salesforce Connector – Column Returns Null values, when SOQL Returns Data in Workbench

Salesforce Connector

Salesforce Connector

Recently, encountered a scenario, which is a little out of the norm while using the SFDC Connector.  Once the issue is understood, it is easily remedied.

The problem / Error

  • SOQL run in Salesforce workbench and column returns data
  • The DataStage job/ETL runs without errors or warnings
  • The target column output only returns null values

The Cause

In short the cause is a misalignment between the SOQL field name and the column name in the columns tab of the connector.

The Solution

The fix is simply to convert the dots in the field name to underscores.   Basically, a field name on SOQL of Account.RecordType.Name becomes Account_RecordType_Name.

Example Field / Column Name  Fix

Example SQL

Select c.Id,

c.AccountId,

c.CV_Account_Number__c,

c.Name,

c.Role__c,

c.Status__c,

c.Account.RecordType.Name

From Contact c

Columns Tab With Correct Naming Alignment

Please note that the qualifying dots have been converted to underscores.

infosphere datastage SFDC Connector Columns Tab

SFDC Connector Columns Tab

Related References

 

SFDC – Using a date literal in a where clause

Salesforce Connector

I found working with date literal, when working with the Infosphere SFDC Connector soql, to be counterintuitive for me.  At least as I, normally, as I use SQL.  I spent a little time running trials in Workbench, before I finally locked on to the ‘where clause’ criteria data pattern.  So, here a quick example.

SOQL DATE String Literals Where Clause Rules

Basically, the date pattern is straight forward. The basic rules are for a soql where clause:

  • No quotes
  • No functions
  • No Casting function, or casting for the where soql where clause to read.

Example SOQL DATE String Literals

So, here are a couple of date string literal examples in SQL:

  • 1901-01-01
  • 2016-01-31
  • 9999-10-31

Example SQL with Date String Literal Where Clause

 

Select

t.id,

t.Name,

t.Target_Date__c,

t.User_Active__c

From Target_and_Segmentation__c t

where t.Target_Date__c > 2014-10-31

 

Related References

Salesforce Developer Documentation

Home, Developer Documentation, Force.com SOQL and SOSL Reference

https://developer.salesforce.com/docs/atlas.en-us.soql_sosl.meta/soql_sosl/sforce_api_calls_soql_select_dateformats.htm

Salesforce Workbench

Home, Technical Library, Workbench

 

InfoSphere / Datastage – What are The support Connectors stages for dashDB?

dashDB

dashDB

In a recent discussion, the question came up concern which Infosphere Datastage connectors and/or stages are supported by IBM for dashDB.  So, it seems appropriate to share the insight gained from the question being answered.

What Datastage Connectors and/or stages are Supported for dashDB

You have three choices as to connectors, which may best meet you your needs based on the nature of your environment and the configuration chooses which have been applied:

  1. The DB2 Connector Stage
  2. The JDBC Connector stage
  3. The ODBC Stage

Related References

Connecting to IBM dashDB

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Information Server on Cloud offerings, Connecting to other systems, Connecting to IBM dashDB

DB2 connector

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Connecting to data sources, Databases, IBM DB2 databases, DB2 connector

ODBC stage

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Connecting to data sources, Older stages for connectivity, ODBC stage

JDBC data sources

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Connecting to data sources, Multiple data sources, JDBC data sources

What is the convert function in Datastage?

Algorithm

Algorithm

 

What is the convert function in Datastage?

In its simplest form, the convert function in Infosphere DataStage is a string replacement operation.  Convert can be used to replace a specific character, a list of characters, or a unicode character (e.g. thumbs Up Sign or Grinning Face).

Convert Syntax

convert(‘<<Value to be replaced’,'<<Replacement value >>’,<<Input field>>)

Using the Convert Function to remove a list of Characters

Special Characters in DataStage Handles/converts special characters in a transformer stage, which can cause issues in XML processing and certain databases.

Convert a list of General Characters

Convert(“;:?\+&,*`#’$()|^~@{}[]%!”,”, TrimLeadingTrailing(Lnk_In.Description))

Convert Decimal and Double Quotes

Convert(‘ ” . ‘,”, Lnk_In.Description)

Convert Char(0)

This example replaces Char(0) with nothing essentially removing it as padding and/or space.

convert(char(0),”,Lnk_In.Description)

 

Related References

String functions

InfoSphere Information Server, InfoSphere Information Server 11.5.0, InfoSphere DataStage and QualityStage, Developing parallel jobs, Parallel transform functions, String functions

Data Modeling – Fact Table Effective Practices

Database Table

Database Table

Here are a few guidelines for modeling and designing fact tables.

Fact Table Effective Practices

  • The table naming convention should identify it as a fact table. For example:
    • Suffix Pattern:
      • <<TableName>>_Fact
      • <<TableName>>_F
    • Prefix Pattern:
      • FACT_<TableName>>
      • F_<TableName>>
    • Must contain a temporal dimension surrogate key (e.g. date dimension)
    • Measures should be nullable – this has an impact on aggregate functions (SUM, COUNT, MIN, MAX, and AVG, etc.)
    • Dimension Surrogate keys (srky) should have a foreign key (FK) constraint
    • Do not place the dimension processing in the fact jobs

Related References

Data Modeling – Dimension Table Effective Practices

Database Table

Database Table

I’ve had these notes laying around for a while, so, I thought I consolidate them here.   So, here are few guidelines to ensure the quality of your dimension table structures.

Dimension Table Effective Practices

  • The table naming convention should identify it as a dimension table. For example:
    • Suffix Pattern:
      • <<TableName>>_Dim
      • <<TableName>>_D
    • Prefix Pattern:
      • Dim_<TableName>>
      • D_<TableName>>
  • Have Primary Key (PK) assigned on table surrogate Key
  • Audit fields – Type 1 dimensions should:
    • Have a Created Date timestamp – When the record was initially created
    • have a Last Update Timestamp – When was the record last updated
  • Job Flow: Do not place the dimension processing in the fact jobs.
  • Every Dimension should have a Zero (0), Unknown, row
  • Fields should be ‘NOT NULL’ replacing nulls with a zero (0) numeric and integer type fields or space ( ‘ ‘ ) for Character type files.
  • Keep dimension processing outside of the fact jobs

Related References

 

 

Datastage – When checking operator: Operator of type “APT_TSortOperator”: will partition despite the preserve-partitioning flag on the data set on input port 0

APT_TSortOperator Warning

APT_TSortOperator Warning

The APT_TSortOperator  warning happens when there is a conflict in the portioning behavior between stages.  Usually, because the successor (down Stream) stage has the ‘Partitioning / Collecting’ and ‘Sorting’ property set in a way that conflicts with predecessor (upstream) stage’s properties, which it is set to preserver.  This can occur when the successor stage has the “Preserve Partitioning” property set to:

  • ‘Default (Propagate)’
  • ‘Propagate’, or
  • ‘Set’
Preserve Partitioning Property - list

Preserve Partitioning Property – list

Message ID

  • IIS-DSEE-TFOR-00074

Message Text

  • <<Link Name Where Warning Occurred>>: When checking operator: Operator of type “APT_TSortOperator”: will partition despite the preserve-partitioning flag on the data set on input port 0.

Warning Fixes

  • First, if the verify that the partitioning behaviors of both stages are correct
  • If so, set the predecessor ‘Preserve Partitioning’ property to “Clear”
  • If not, then correct the partitioning behavior of the stage which is in error

Clear Partitioning Property Screenshot

Preserve Partitioning Property - Set To Clear

Preserve Partitioning Property – Set To Clear

Infosphere DataStage – Boolean Handling for Netezza

Datastage Director Message - Numeric string expected

Datastage Director Message – Numeric string expected

 

Beware when you see this message when working with Boolean in DataStage, the message displays as informational (at list it did for me) not as a warning or an error.  Even though it seems innocuous, what it meant for my job, was the Boolean (‘true’ / ‘false’) was not being interpreted and everything posted to ‘false’.

In DataStage the Netezza ‘Boolean’ field/Data SQL type maps to the ‘Bit’ SQL type, which expects a numeric input of Zero (0) or one (1).  So, my solution (once I detected the problem during unit testing) was to put Transformer Stage logic in place to convert the Boolean input to the expected number value.

 

Netezza to Datastage Data Type Mapping

Netezza data types

InfoSphere DataStage

data types (SQL types)

Expected Input value

BOOLEAN Bit 0 or 1 (1 = true, 0 = false)

 

Transformer Stage logic Boolean Handling Logic

A Netezza Boolean field can store: true values, false values, and null. So, some thought should be given to you desired data outcome for nulls

This first example sets a that the nulls are set to a specific value, which can support a specific business rule for null handling and, also, provide null handling for non-nullable fields.  Here we are setting nulls to the numeric value for ‘true’ and all other non-true inputs to ‘false’.

If isnull(Lnk_Src_In.USER_ACTIVE) then 1 Else if Lnk_Src_In.USER_ACTIVE = ‘true’ Then 1 Else 0

These second examples sets a that the nulls are set by the Else value, if your logic direction is correct value and still provides null handling for non-nullable fields.

  • If  Lnk_Src_In.USER_ACTIVE = ‘true’ Then 1 Else 0

  • If  Lnk_Src_In.USER_ACTIVE = ‘False’ Then 0 Else 1

Director Log Message

Message ID

  • IIS-DSEE-TBLD-00008

Message Text

  • <<Link Name Where Message Occurred>>: Numeric string expected. Use default value.

Or something like this:

  • <<Link Name Where Message Occurred>>: Numeric string expected for input column ‘<<Field Name Here>>‘. Use default value.

Related References

Boolean

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza user-defined functions, UDX data types reference information, Supported data types, Boolean

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.udf.doc/r_udf_boolean_datatype.html

Data types and aliases

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza stored procedures, NZPLSQL statements and grammar, Variables and constants, Data types and aliases

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.sproc.doc/c_sproc_data_types_aliases.html

Logical data types

PureData System for Analytics, PureData System for Analytics 7.2.1, IBM Netezza database user documentation, Netezza SQL basics, Data types, Logical data types

https://www.ibm.com/support/knowledgecenter/en/SSULQD_7.2.1/com.ibm.nz.dbu.doc/r_dbuser_data_types_logical.html

Data type conversions from Netezza to DataStage

InfoSphere Information Server, InfoSphere Information Server 11.5.0, Connecting to data sources, Databases, Netezza Performance Server, Netezza connector, Designing jobs by using the Netezza connector, Defining a Netezza connector job, Data type conversions, Data type conversions from Netezza to DataStage

https://www.ibm.com/support/knowledgecenter/en/SSZJPZ_11.5.0/com.ibm.swg.im.iis.conn.netezza.use.doc/topics/nzcc_mappingdatatypes.html